Drum Handling News

Storing drums in-line near the wall, between columns, and in all those spaces you thought were unusable. Optional drain.

• Holds four 55-gallon drums
• Low 12” profile
• Holds up to 3,000 lbs UDL wt.
• Raised edge on back and sideshelps orient barrels on pallet
• Non-skid, removable grates
• 66-gallon sump capacity meetsEPA 40 CFR 264.175
• 100% polyethylene.

Product Number:5102-YE5102-YE-D (w/drain)Optional Tarp available(Product No. 5062-YE)

Dimensions:98.25” L x 25.25” W x 12” H249.56 cm x 64.14 cm x 30.48 cm

Weight:80 lbs. / 36 kg

Load Beraing Capacity UDL:3000 lbs. / 1360.8 kg

Sump Capacity:66 gal. / 249.8 liters

Regulations:EPA 40 CFR 264.175,SPCC and NPDES

If you have any questions regarding this product please contact us.If you own this equipment please leave a comment below.

Specially-designed to be used with an absorbent sock for soaking up liquids from dispensing drums. Oversized dolly helps keep drips in the pan and area around the drum clean. Eases handling of overpack drums also. Handles drums up to 28” in diameter. Absorbent sock included with model 9713 only.

Read more…

The ORIGINAL Mobile
Dispensing Scooter.

Dispensing drums while
transporting them around the plant
is no longer a problem thanks to
our Spill Scooter. The Spill Scooter
provides secondary containment
or incidental spills and drips which
often occur during vertical dispensing
applications.

Incidental spills and drips are contained in the well, with a spout for easy draining. The Spill Scooter fits all drums up to 55 gallons. Made of 100% polyethylene, the Spill Scooter will not rust or corrode.

Features a built-in bung Read more…

The NEW Mini Racker-Stacker™ System is ideal for storage and dispensing of small containers with built-in spill protection and patented enclosed sump. The system has a mobility option to make movement in the plant environment safe and easy too.  The Mini Racker-Stacker™ System helps save liquids that are routinely lost during the dispensing process and helps protect worker safety by keeping the dispensing area neat and clean.The Mini Racker Stacker™ System consists of the base Racker that will hold two (2) 5-6.5 US gallon metal or plastic lidded pails or cans, or two (2) 5 US gallon or smaller metal or plastic “jerry cans Read more…

Group 1 packaging standards, Salvage Drum regulations, and is designed to fit 30-gallon drums.
This overpack nests for easy storage and has a gasket in the lid for secure containment. No wasted space!
No wasted money!

Great As A Spill Kit Container!
It’s light enough for one person to handle and large enough to pack sufficient absorbent and response equipment for incidental spills. Product Number: 1065-YE

Read more…

This secondary containment system is engineered to meet the rigors of today’s regulatory environment.
With 100% polyethylene, it provides
excellent chemical resistance.
Drain hole with plug available.

• Meets EPA 40 CFR 264.175
• Holds up to 2,000 lbs UDL
• Forkliftable
• Removable grates for easy cleaning

Product Number:
5253-YE
5253-YE-D (w/drain)

Optional Tarp available
(Product No. 5063-YE). Read more…

A sturdy solution to indoor/outdoor storage of up to four 55-gallon drums. Weatherproof! Roll-top design allows it to be used in limited space or next to buildings where swing-open doors would be a problem. Takes up less than 25 square feet of floor space.
Allows ample room for drum pumps.
Used in conjunction with
Poly-Slim-Line™ 6000 Product No.
5400-YE). Optional drain.
Shipped knocked down only.

Shown with optional ramp

Product Number: 4064-YE Read more…

Ideal for indoor/outdoor storage of up to two 55-gallon drums. Roll-top design allows for use in limited space or next to buildings where swing-open doors would be a problem. Top or front/rear loadable. Lockable door! Used in conjunction with Poly-Spillpallet™ 2000 (Product No. 5253-YE). Shipped knocked down only. Shown with optional Poly-Ramp (Product No. 5039-BK) and Ramp Extender (Product No. 5038-BK). Optional Drain available.

Product Number: 4062-YE; 4062-YE-D (w/drain) Dimensions: Exterior: 60” L x 37.25” W x 72.63” H 152.4 cm x 94.62 cm x 184.47 cm Interior: 51” L x 30” W x 52” H 129.54 cm x 76.2 cm x 132.08 cm Weight: 210 lbs. / 95 kg Load Bearing Capacity UDL: 2000 lbs. / 907.2 kg Sump Capacity: 58 gal. / 219.6 liters Regulations: EPA 40 CFR 264.175, SPCC and NPDES If you have any questions regarding this product please contact us. If you own this equipment please leave a comment below.