Tilt and pour a drum below-hook with your hoist or crane
More than just a drum inverter or drum dumper…
…drum carriers for controlled drum dispensing
Lift, rotate and control the pour of a drum with Morse drum carriers. Use these below the hook drum carriers with your hoist or crane to control the pour of drum contents, rather than simply dump the entire contents with a drum inverter.
- 185 and 195 Series below the hook drum tilter to pour drum above operator reach
- 85 Series drum tilter for pouring within operator reach
- Tilt drum 360° in either direction. Lift and invert drum with drum faucet in place.
Drum tilt-control options
- Standard drum tilt control is pull chain and chain wheel (shown above left)
- Available with optional hand crank drum tilt control
- Also available with 16″ hand wheel drum tilt control
Morse below-the-hook drum lifters (i.e. Models 85A, 185A, 90, 41, etc.) are manufactured by Morse Mfg. Co., Inc. in East Syracuse, NY 13057. These drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:
- Rated load markings and unit identification
- Minimum design safety factor of 3, based on yield strength, for load bearing structural components
- Welding is performed by certified welders who have passed the ANSI/AWS D1.1 welding qualification test
If you have any questions regarding this product please contact us.
If you own this equipment please leave a comment below.
